SimpleACME
Sign inCreate account →
Certificate troubleshooting

Traefik renewal troubleshooting: resolver, router and DNS evidence

Traefik renewal troubleshooting: resolver, router and DNS evidence. Practical diagnosis, a SimpleACME DNS-01 workflow, and checks for safe unattended renewal.

A catch-all certificate error hides several different failure points. Confirm the router references the intended certificate resolver, that the requested names are correct and that the resolver's selected challenge provider can present the proof. Then compare client logs with the SimpleACME TXT timeline. If presentation succeeds but the browser sees another certificate, investigate TLS routing and deployment state instead of changing the challenge record repeatedly.

This guide addresses a problem raised in a public r/selfhosted discussion. The discussion identifies the question; the runbook below is our own explanation, not a claim that the original poster used or endorsed SimpleACME. Read the source discussion for its historical context and compare it with the current client documentation linked below.

Traefik renewal troubleshooting: resolver, router and DNS evidence: a permanent challenge CNAME connects normal DNS to SimpleACME TXT updates while the ACME client retains issuance and private keys.
Traefik renewal troubleshooting: resolver, router and DNS evidence: a permanent challenge CNAME connects normal DNS to SimpleACME TXT updates while the ACME client retains issuance and private keys.

Follow the whole renewal chain

Trace a renewal as a sequence: scheduler, client configuration, DNS presentation, CA authorization, certificate storage, deployment and the final TLS listener. Write down the first failing stage. Later messages often say only that issuance failed and can conceal the specific error that explains the incident. Preserve a currently valid certificate while making a controlled repair.

A restart is not an end-to-end test. Recreate the relevant client process in its normal unattended environment, verify that persistent files remain available and inspect its actual exit status. Keep an independent expiration check on the served endpoint so a broken scheduler does not remain invisible until users complain. If several machines participate, record the handoff between them and give each operation a clear owner. That reduces the chance of one successful step hiding a failure further along.

Start with these three checks

  1. Check router tls.certresolver names against the defined resolver.
  2. Read the earliest ACME error before the final generic message.
  3. Probe the intended hostname with SNI after certificate issuance.

Work through the checks against the running system, not only the configuration you expected to deploy. Save a short record of the observed answer, the client version and the first failing log message. Make one relevant change at a time so you can tell whether it corrected the original failure. Keep real credentials and private-key contents out of that record.

Traefik renewal troubleshooting: resolver, router and DNS evidence: diagnostic checklist covering check router tls.certresolver names against the defined resolver, read the earliest ACME error before the final generic message, probe the intended hostname with SNI after certificate issuance.
Traefik renewal troubleshooting: resolver, router and DNS evidence: diagnostic checklist covering check router tls.certresolver names against the defined resolver, read the earliest ACME error before the final generic message, probe the intended hostname with SNI after certificate issuance.

Configure Traefik with a stable delegation

Prepare the intended name in your SimpleACME account and copy its exact challenge CNAME. A free account can prepare one single-domain demo, but DNS updates are blocked until paid access is active. Paid single-domain and wildcard registrations follow accepted payment. Choose the required coverage deliberately; a registration or a plan label is not proof that every certificate identifier is included.

Add the CNAME at your existing authoritative DNS provider. Preserve it for later renewals, and configure the client to update the existing registration it points to. You do not need to share the normal DNS provider's API credentials with the renewal host. Your existing website and email DNS stay where they are. A CNAME is needed per distinct challenge owner, rather than one record for an unrelated collection of hostnames.

For Traefik, use the ACME-DNS provider and the existing registration supplied by your SimpleACME account. Keep the registration storage distinct from the ACME certificate storage. Configure the SimpleACME API base and the persistent ACME-DNS mapping path inside the container, select the intended resolver and attach it to the appropriate TLS router. Check your installed release's current configuration syntax.

Treat both persistence and permissions as part of the deployment. The proxy must be able to use its configured storage after a restart or container replacement. Do not delete certificate state as a routine attempt to make a browser's default certificate disappear. Inspect the actual resolver error, then test the corrected DNS presentation path in staging. For replicated or orchestrated deployments, follow the proxy's supported certificate-state architecture instead of assuming a shared writable file provides coordination.

Test the result at all three boundaries

Begin with a staging validation using a separate test certificate configuration where the client supports it. Check the final public DNS answer before asking the CA to validate. These read-only examples use illustrative names; replace them with the exact challenge owner and hostname from your own setup:

dig +short CNAME _acme-challenge.app.example.com
dig +short TXT _acme-challenge.app.example.com
openssl s_client -connect app.example.com:443 -servername app.example.com </dev/null

Then inspect the client result to confirm that the CA actually issued a certificate. Finally, inspect the certificate served by the target application from the relevant user network. Compare its names and expiration with the issued object. Test the unattended job again after a controlled restart or container recreation. Record how you would recover if the validation host or deployment target became unavailable.

Know the service boundary before relying on it

DNS-01 does not configure Traefik's application routing for you. Certificate name selection and TLS router attachment remain your responsibility.

SimpleACME records TXT authorization changes and can send optional DNS-change notifications. That timeline is useful evidence, but it cannot confirm issuance or installation performed by your independent client. Keep a separate served-certificate expiry check and review update entitlement before the paid-through date. Yearly subscription billing is not the certificate validity period; let the ACME client renew when its authority and renewal policy require it.

Frequently asked questions

Does SimpleACME fix this entire problem automatically?

DNS-01 does not configure Traefik's application routing for you. Certificate name selection and TLS router attachment remain your responsibility. The delegated workflow removes the normal-zone API dependency from DNS presentation. The diagnosis, client configuration and application verification described above still matter. Use the three concrete checks in this guide to identify which part of the system needs repair before changing unrelated infrastructure.

What should stay unchanged after the first successful setup?

Keep the assigned challenge CNAME, the existing registration mapping and the supported client workflow persistent. The authorization TXT value changes for new validations; the delegation normally does not. If you replace a registration, migrate the corresponding mapping and DNS record together. Recheck the public answer and complete an unattended staging test before depending on the replacement.

How do I know renewal is complete?

Treat a successful TXT update, successful CA issuance and correct application deployment as separate results. Inspect client logs, validate the issued certificate and probe the endpoint using the correct hostname. A browser showing an old certificate is a reason to inspect routing, bindings and reload behavior, even when DNS presentation worked. Maintain an independent expiry alert for the service users actually reach.

References and the next step

Use the SimpleACME Traefik guide for supported setup details and the subscriber how-to library for the reviewed configuration and script examples. Consult the primary references below for the installed client's current options. If this matches your constraints, create an account and prepare your domain, verify the CNAME, then activate the required update access before a production validation.

KEEP EXPLORING

A little more clarity.

ONE CNAME. A REPEATABLE WORKFLOW.

Your next certificate. A little less complicated.

Keep your DNS provider and your ACME client.
Prepare your domain before activating paid updates.

Create your account →Explore the integrations